Bernina Ruffler 86
The Bernina Ruffler looks quite a complicated piece of equipment, but it's easier to handle than it looks! The ruffler comes with a replacement spring and a small screwdriver, used for turning an adjustment screw to change the depth of the pleats.Pleats or gathers can be set with every stitch, every 6th stitch, or every 12th stitch, by changing the adjustment lever. By setting the adjustment lever to 0, you can also sew without pleating, meaning there is no need to change the presser foot for straight stitching. The up and down movement of the needle causes the special ruffler blade to move in and out, taking hold of a section of the fabric each time and sliding it under the needle, creating gathers or pleats.The result is neat, even gathering or pleats, created easily and quickly on garments or home furnishing projects. Please Note, this foot is only suitable for the following models: Bernina 910 and 930, 1000 through to 1630, including the current 1008.